Versions Compared

Old Version 51

changes.mady.by.user Anthony George

Saved on

compared with

New Version 52

changes.mady.by.user Anthony George

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Overview

PhixFlow expects to use a keystore for:

  • a pepper string, which PhixFlow will add to local user passwords when encrypting them
  • the database username and password.

The pepper string and database account credentials are encrypted and stored here, along with their aliases. You can then use an alias to retrieve each secret from the keystore.

To configure the keystore, use the Java keytool -importpass command at the command line. In the following examples, we have used

  • a file type of PKCS12. You can also use JCEKS.
  • a keystore name of keystore.jks. If you use a different name for the keystore, you must update its name in the phixflow-secret.xml configuration file.
See also


Panel
borderColor#7da054
titleColorwhite
titleBGColor#7da054
borderStylesolid
titleSections on this page

Table of Contents
indent12px
stylenone



Tip

When you run the keytool -importpass command, it always prompts for a "password". This is because the keytool does not distinguish between the secrets that it stores. At the prompt, enter the actual value you want to store securely.

Create the keystore and add the pepper string and its alias

If you are creating the keystore on Windows, you must use the backslash \ in the path. PhixFlow will not be able to read the pepper key value if you use the forward slash /.

Note
If you have follow the recommended instructions for installing Java (Install Java) the keytool program will be in your path. If you have take a different approach, you can find the keytool program under JAVA_INSTALLATION_HOME/bin.
  1. Run the -importpass command, specifying the alias: pepperKey 
    The alias is case-sensitive and must match phixflow-instance.xml: <prop key="pepperKey">pepperKey</prop>
    If you use a different alias, update phixflow-instance.xml to use the same alias.

  2. When prompted, enter the password you want to set for the keystore file, then re-enter to confirm it.
    Keep a secure record of this password.

    Tip

    If you are following these instructions to upgrade PhixFlow, and your keystore already exists, in step 2 enter the password for your keystore.
    See also: Adding Data to a Keystore


  3. When prompted for the password, enter the string you want to use to pepper user passwords. 
    We recommend this string has the same characteristics as a password. For example it should be a random string containing at least 6 letters, numbers and special characters. 
    Keep a secure record of the pepper key. 
Code Block
titleWindows Command Line Example
keytool -importpass -alias pepperKey -keystore C:\secure\keystore.jks -storetype PKCS12


Code Block
titleWindows Powershell Example
keytool -importpass -alias pepperKey -keystore C:\secure\keystore.jks -storetype PKCS12


Code Block
titleLinux Example
keytool -importpass -alias pepperkey -keystore /opt/secure/keystore.jks -storetype PKCS12


Add Database Credentials

Step 1  Add the database username

1.1 Run the -importpass command, specifying the alias username for the PhixFlow database, for example phixflow-database-user.

1.2 When prompted, enter the keystore password.

1.3 When prompted for the password, enter the actual username for the PhixFlow database, for example phixflow. 

Code Block
titleWindows Command Line
keytool -importpass -alias phixflow-database-user -keystore C:\secure\keystore.jks -storetype PKCS12


Code Block
titleWindows Powershell Example
keytool -importpass -alias phixflow-database-user -keystore C:\secure\keystore.jks -storetype PKCS12


Code Block
titleLinux Example
keytool -importpass -alias phixflow-database-user -keystore /opt/secure/keystore.jks -storetype PKCS12

Step 2  Add the database password and alias to the keystore file

2.1.  Run the -importpass command specifying the alias password for the PhixFlow database, for example phixflow-database-password.

2.2  When prompted, enter the keystore password.

2.3 When prompted for the password, enter the actual password for the PhixFlow database.

Code Block
titleWindows Command Line Example
keytool -importpass -alias phixflow-database-password -keystore C:\secure\keystore.jks -storetype PKCS12


Code Block
titleWindows Powershell Example
keytool.exe -importpass -alias phixflow-database-password -keystore C:\secure\keystore.jks -storetype PKCS12

Code Block
titleLinux Example
keytool -importpass -alias phixflow-database-password -keystore /opt/secure/keystore.jks -storetype PKCS12

Step 3  Configure phixflow-datasource.xml

Edit phixflow-datasource.xml to add the aliases for the PhixFlow database username and password. For example:

Code Block
<property name="username">
	<value>phixflow-database-user</value>
</property>
<property name="password">
	<value>phixflow-database-password</value>
</property>

Step 4  Set the Environment Variable

Note

We recommend that you use an environment variable for the keystore password, as it provides additional security.
If you do not set an environment variable, you must include the keystore password in phixflow-secret.xml.

Create an environment variable with the form <variable-name>: <keystore-password>


In WindowsIn Linux
<variable-name>

In Windows:  In the environment variable, specify any variable name you choose.

Use the EnvironmentFile directive in the systemd service definition.
Ensure that only root can read/write EnvironmentFile.

For information about how to set environment variables in Linux, see:

<keystore-password>

Specify the password for the keystore.


Warning

Never add the keystore password to the profile for the Tomcat user.

Step 5  Configure phixflow-secret.xml

Copy phixflow-secret.xml.example to phixflow-secret.xml and edit it to set the values as follows:

Required?PropertyValueExample
RequiredkeystoreTypeThe type of the keystore, either PKCS12 or JCEKS

<!-- keystore type (PKCS12 or JCEKS) -->
<property name="keystoreType">
   <value>PKCS12</value>
</property>

RequiredkeystoreFile

The path to the keystore.

<!-- keystore filepath  -->
<property name="keystoreFile">
   <value>/opt/secure/keystore.jks</value>
</property>

Either
(recommended)		keystorePassEnvironmentVariable

The name of the environment variable.

Use <!-- and --> to comment out the keystorePass property.


Info

When specifying the value for the password in an environment variable, the value entered should adhere the policy of the environment variables for your operating system. 


<!-- keystore password -->
<property name="keystorePassEnvironmentVariable"><value>KEY_PASS</value>
</property>

OrkeystorePass

The password for the keystore.

Use <!-- and --> to comment out the keystorePassEnvironmentVariable property.

Info

When specifying the value for the password in the phixflow-secret.xml, special characters will need to be escaped.


<!-- keystore password -->
<property name="keystorePass">
   <value>storepw</value>
</property>


Warning

On startup, PhixFlow checks that there is one password mechanism, either keystorePassEnvironmentVariable or keystorePass. Do not specify both as this will prevent PhixFlow from running.

Changing the Keystore Password

The keystorepassword is used to encrypt the values held within the keystore. To change the encryption we recommend creating a copy of the keystore with a new password. Changing the password directly on the keystore corrupts the values held within it.

The process for logic is to create a new keystore is:

  1. Tomcat will need to be stopped.
  2. Import the existing keystore, source, at which point you will be prompted for the source its password, into a new destination keystore instance that has the a new password.
  3. You will then need to point the PhixFlow-Secret.xml at the new keystore, and update keystore password in this file or the environment variable.

Examples

Code Block
titleLinux
linenumberstrue
keytool -importkeystore \
 -srckeystore keystore.jks -srcstoretype PKCS12 \
 -destkeystore keystore2.jks -deststoretype PKCS12


Code Block
titleWindows
linenumberstrue
keytool -importkeystore \
 -srckeystore keystore.jks -srcstoretype PKCS12 \
 -destkeystore keystore2.jks -deststoretype PKCS12