Exporter exports data held in a Stream to a HTTP Datasourcestandardsettingsstandard_settings

Panel

borderColor	#7da054
titleColor	white
titleBGColor	#7da054
borderStyle	solid
title	Sections on this page

Table of Contents

indent	12px
style	none

Tick when Exporter DatasourceThe HTTP Datasource that this exporter will send data to.

Send Message

Define details of the data that will be sent to the HTTP Datasource.

Field

Description

HTTP Request Method

Insert excerpt

	HTTP Collector Properties
	HTTP Collector Properties
nopanel	true

URL Expression

The URL to be used, without the leading http:// prefix. The URL may contain embedded expressions within { }. If this field is blank, the url field on the httpDatasourceInstance is used directly.

For Example, this expression adds to the base url provided by the HTTP Datasource Instance:

Code Block
{_url}/sub1/sub2?param1=3

Statement Expression

An expression to generate the data that will be sent by the exporter to the datasource. For example:

Code Block

&lt?xml version ="1.0"?&gt &lt!DOCTYPE CORPORATE DASHBOARD 
"corpDash.dtd"&gt &ltresults user="%USERNAME%" 
password="%PASSWORD%"&gt &ltmonthlyTotals region={'"' + Region +
 '"'} division={'"' + Division + '"'}&gt 
&lttotalBilled&gt{'"' + TotalBilled + 
'"'}&lt\totalBilled&gt &lttotalCollected&gt{'"' + 
TotalCollected + '"'}&lt\totalCollected&gt 
&ltmonthlyTotals&gt &lt\results&gt

Note

Note : are referenced via syntax. HTTP

Send Message

Define details of the data that will be sent to the HTTP Datasource.

FieldDescriptionURL Expression

The URL to be used, without the leading http:// prefix. The URL may contain embedded expressions within { }. If this field is blank, the url field on the httpDatasourceInstance is used directly.

For Example, this expression adds to the base url provided by the HTTP Datasource Instance:

Code Block
{_url}/sub1/sub2?param1=3

HTTP Headers

This section has a toolbar with standard buttons. The grid contains a list of the HTTP headers defined for this exporter. To add a HTTP header to the list, click

Insert excerpt

	_new
	_new
nopanel	true

. PhixFlow opens a new HTTP Header Properties properties. To remove a HTTP header, use the

Insert excerpt

	_delete
	_delete
nopanel	true

in the toolbar.

Response

Define how the responses from the HTTP Datasource will be handled if the the connection is either successful or fails.

Field	Description

Result to record on the Stream

Expression to evaluate the value to put on the stream. For example:

Code Block
if(_success, _response, listToString($errors._MSGTEXT))

Check if the response indicates successful export

Expression to evaluate the response from the HTTP datasource, where a connection was made. For example:

Code Block
countElements($errors = xmlToItems(_response,"//ERROR")) == 0

Result to record on the Stream after a connection failure

Value to put on the Stream in the event that the HTTP connection attempt failed. For example:

Code Block
_error

Inputs

This section has a list of the HTTP Headers defined for this exporter.

Advanced

FieldDescriptionRecord Export TimeIf required Stream from the drop down list. If an attribute is selected, when message (HTTP datasource) will be Stream this will be - - , and set Warning: if then this attribute will still be populated, even in the case that If required Stream from the drop down list. If an attribute is selected, when (HTTP datasource) will be export status (success or fail).
If a record in the input Stream is not exported, this attribute will be left blank.
The field is populated with result from "Check if the response indicates successful export" from the response tab. If a record is exported - but the export is rolled back - the attribute will be updated, and set back to a blank record.
Warning: if a record fails to export then this attribute will still be populated, even in the case that the export transaction in the target HTTP datasource is rolled back.Record ResponseIf required Stream from the drop down list. If an attribute is selected, when (HTTP datasource) will be error messages.
If a record in the input Stream is not exported, this attribute will be left blank.
The field is populated with result from "Result to record on the Stream" (and/or "Result to record on the Stream after a connection failure"). If a record is exported - but the export is rolled back - the attribute will be updated, and set back to a blank record.
Warning: if a record fails to export then this attribute will still be populated, even in the case that the export transaction in the target HTTP datasource is rolled back

messages from:

either Value to record on success
or Value to record on failure

Status

Enter an expression to report a status. For example:

Code Block
if(_success, _response, listToString($errors._MSGTEXT))

This value is used by Record Export Status to update an attribute in the input table.

Value to record on success

Enter an expression to report a response when the HTTP connection succeeds. For example:

Code Block
countElements($errors = xmlToItems(_response,"//ERROR")) == 0

This value is used by Record Response to update an attribute in the input table.

Connection failed

Value to record on failure

Enter an expression to report a message when the HTTP connection fails. For example:

Code Block
_error

This value is used by Record Response to update an attribute in the input table.

Inputs

This section has a list of the HTTP Headers defined for this exporter.

Multipliers

Field

Description

Input Multiplier

Enter an expression that multiplies the data. This works in the same way as the Input Multiplier Expressions on tables and File Exporters. A complete export is carried out for each value in the list of values returned by this expression. If the expression evaluates to an empty list, then no export will be carried out. If no expression is set, a single export will be carried out.

See Expressions and PhixScripts.

Advanced

Field	Description
Datasource	The HTTP Datasource that this exporter will send data to.
Datasource Instance Expression	The target datasource for this exporter may list multiple HTTP Datasource instances. Each datasource instance is identified by a unique string. This expression should evaluate to a string which allows the HTTP Exporter to determine the instance to use. If no value is entered then the exporter will assume that there is only one instance and will use that one by default. If there is more than one instance and no expression is provided here then an error will be thrown during analysis.
Timeout (secs)	Tells the exporter to timeout each export operation after a number of seconds. If an export operation does time out, the operation will be abandoned and an error will be reported. Each record that is timed out is considered to be a single error when assessing whether the entire export should be stopped and/or rolled back - see Errors Before Rollback below. If no value is specified, the duration of an export operation is unlimited.
Parallel Exporters	If required, you can specify that the exporter should use a number of parallel exporters. Each buffer of records read from the input pipe will be divided across the parallel exporters. The restriction applied to this is that if Group By fields are specified in the input Pipe to the exporter, all records with the same Group By key will be exported by the same exporter. If no value is specified here then only a single exporter will be used.
Errors Before Rollback	If required, you can set the maximum number of errors found, while exporting across all exporters, before the exporter will rollback all uncommitted transactions from all exporters. If no value is specified, the exporter will never rollback, no matter how many errors are found. If 1 is specified, a single error will cause a rollback. Up to this number of errors, any errors reported from the exporter will appear as warnings in the log entries. The export will not be considered failed unless the number of errors is above this threshold.

Commit SizeTells the exporter to commit records in batches of the specified size.Log Traffic Insert excerpt_log_traffic2_log_traffic2nopaneltrueLog HTTP Exporter Connection Details : when ticked, PhixFlow always logs details of connections by HTTP exporters, whatever is set here

Errors Before Stopping

If required, you can set the maximum number of errors found, while exporting across all exporters, before the exporter will stop attempting to export records to the datasource.
This is useful where you have set Errors Before Rollback (also configured on this tab), but wish to continue to try to export records to get view of how successful the remaining export would have been. Any records that the exporter attempts to export after the Errors Before Rollback limit has been passed will always be rolled back, even if they are successful.
If no value is entered, the exporter will stop when the Errors Before Rollback limit is reached.

Timeout (secs)

Tells the exporter to timeout each export operation after a number of seconds. If an export operation does time out, the operation will be abandoned and an error will be reported. Each record that is timed out is considered to be a single error when assessing whether the entire export should be stopped and/or rolled back - see Errors Before Rollback below.

If no value is specified, the duration of an export operation is unlimited.

IconPath name for image file.Input MultiplierThis expression works in the same way as the Input Multiplier Expressions on Streams and Database Exporters. A complete export is carried out for each value in the list of values returned by the Input Multiplier Expression. If the Input Multiplier Expression evaluates to an empty list then no export will be carried out. If no Input Multiplier Expression is set, a single export will be carried out.Datasource Instance ExpressionThe target datasource for this exporter may list multiple HTTP Datasource instances.
Each datasource instance is identified by a unique string. This expression should evaluate to a string which allows the HTTP Exporter to determine the instance to use.
If no value is entered then the exporter will assume that there is only one instance and will use that one by default. If there is more than one instance and no expression is provided here then an error will be thrown during analysis.

Icon

Enter the path for an image file that has been uploaded to the PhixFlow database. PhixFlow displays this icon in controls when the HTTP exporter is used.

Log Traffic

Insert excerpt

	_log_traffic1
	_log_traffic1
nopanel	true

Commit Size

Specify the number of records for the HTTP exporter to commit in a batch.

Insert excerpt

	_model_prop
	_model_prop
nopanel	true

Insert excerpt

	_description
	_description
nopanel	true

Insert excerpt

	_audit
	_audit
nopanel	true

Live Search
spaceKey @self
additional none
placeholder Search all help pages
type page

Panel

borderColor	#00374F
titleColor	white
titleBGColor	#00374F
borderStyle	solid
title	Sections on this page

Table of Contents

maxLevel	3
indent	12px
style	none

Learn More

For links to all pages in this topic, see Analysis Models for Batch Processing Data.

Insert excerpt

	_

logtraffic1logtraffic1

Field	Description
Name	Name of the HTTP Exporter.
Enabled

Versions Compared

Old Version 25

New Version 26

Key

Overview

Insert excerpt
_

property_

tabs
_

property_tabs
name basic-h
nopanel true

Basic Settings

Send Message

Send Message

HTTP Headers

Response

Inputs

Advanced

Multipliers

Advanced

Live Search
spaceKey @self
additional none
placeholder Search all help pages
type page

Page Comparison

Versions Compared

Old Version 25

New Version 26

Key

Overview

Insert excerpt_

property_

tabs_

property_tabsnamebasic-hnopaneltrue

Basic Settings

Send Message

Send Message

HTTP Headers

Response

Inputs

Advanced

Multipliers

Advanced

Live SearchspaceKey@selfadditionalnoneplaceholderSearch all help pagestypepage

Insert excerpt
_

tabs
_

property_tabs
name basic-h
nopanel true

Live Search
spaceKey @self
additional none
placeholder Search all help pages
type page