Page Comparison

...

<Context>
    <!-- lines omitted -->
	<Resources cachingAllowed="true" cacheMaxSize="1000000" />
</Context>

server.xml:

...

By default, Tomcat will use ports 8080 for HTTP and 8443 for HTTPS.

If you need to use different ports, you can set them in $TOMCAT/conf/server.xml. E.g.

Connector settings

Edit the <Connector block in $TOMCAT/conf/server.xml to:

1. Use the required port number (port="8080"). Tomcat defaults to port 8080 for HTTP, but you may need to use a different port if you are running other web servers on the same host.
2. Enable compression (compression="force"). Compressing responses from the server is particularly important if you are going to access the PhixFlow server over a slow connection (e.g. a mobile data connection).

After editing, the <Connector/> block should look like this:

<!-- Define a non-SSL HTTP/1.1 Connector on port 8080 -->
<Connector port="8080" protocol="HTTP/1.1"
       <Connector
		port    connectionTimeout="808120000"
		maxHttpHeaderSize           redirectPort="8192" …8443"
           compress="force"/>

Remember to enable this port in the server’s firewall (if enabled).

...