PhixFlow Help

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 10 Next »

You can set up access to PhixFlow either through PhixFlow Users, by integrating with your Active Directory infrastructure, or with SAML. If you integrate with SAML, Access Control is maintained by mapping Active Directory Groups to PhixFlow User Groups, as described below. By using the SAML integration users will be redirected to a chosen identity provider page where they will enter their username and password. If they are successfully authenticated they will then be redirected to PhixFlow and logged in.

This page describes how to integrate PhixFlow with SAML:

Configure phixflow-login.xml

Configuration details for SAML are configured in the file phixflow-SAML.xml, under [tomcat root]/webapps/phixflow/WEB-INF/classes. When you first install PhixFlow, you probably created a copy of this file by simply copying the example file phixflow-login.xml.example (see Install PhixFlow Webapp).

Configure the authentication manager

Add the SAML auth provider (which is already defined) to the authenticationProvider.

Find this section of the file:

	<security:authentication-manager alias="authenticationManager">
		<!-- test authentication provider, leave commented out -->
		<!-- <security:authentication-provider ref="testAuthProvider" /> -->

		<!-- local authentication provider - provide access for CenterView database users. Don't change it -->
		<security:authentication-provider ref="localAuthProvider" />

		<!-- Add an Active Directory Authentication Provider below this line; uncomment if using active directory integration -->
		<!-- <security:authentication-provider ref="exampleActiveDirectoryAuthProvider" /> -->

		<!-- Add SAML Authentication Provider; uncomment if using saml / single sign-on -->
		<!-- <security:authentication-provider ref="samlAuthProvider"/> -->
	</security:authentication-manager>

... and edit it to look like this (omitting comments):

	<security:authentication-manager alias="authenticationManager">
		<security:authentication-provider ref="localAuthProvider" />
		<security:authentication-provider ref="samlAuthProvider" />
	</security:authentication-manager>

We recommend that you do not remove the localAuthProvider, and that you retain a local administrator user so that you can still login in the event of a problem with the active directory integration.

Enable SAML beans

These 2 blocks serve to disable the bulk of the file for the normal case where SAML is not required.

Find these lines and remove them or comment them out:

	<!-- comment out to enable saml / single sign-on -->
	<beans profile="saml">

Find these lines, near the end of the file, and remove them or comment them out:

	<!-- comment out to enable saml -->
	</beans>

Configure the keyManager

The SAML integration requires one or more public/private keys. These are stored in a Java keystore file, and the information needed to access that file is configured in the keyManager.

Instructions for creating a keystore can be found here: Configure Tomcat For HTTPS.

Below is an example of a keystore:

	<!-- The KeyStore stores encryption keys -->
	<bean id="keyManager" class="org.springframework.security.saml.key.JKSKeyManager">
		<!-- the keystore file -->
		<constructor-arg value="file:/opt/tomcat/secure/keystore.jks" />
		<!-- password protecting the keystore -->
		<constructor-arg type="java.lang.String" value="keyStorePassword" />
		<constructor-arg>
			<map>
				<!-- key alias and key-specific password; add one entry for each key in the keystore -->
				<entry key="keyAlias" value="keyPassword" />
			</map>
		</constructor-arg>
		<!-- default key alias -->
		<constructor-arg type="java.lang.String" value="defaultKeyAlias" />
	</bean>

For the most basic configuration just replace the "file:/.../keystore.jks" with your keystore, "KeyStorePassword" with your keystore password and "keyPassword" with your key password.

For security reasons, access to phixflow-login.xml and to keystore.jks should be restricted so that they are read-only to the tomcat user / account and not readable by regular users.

Configure the Context Provider

The context provider communicates the external view of the PhixFlow server to other parts of the configuration.

If the server does not run behind a reverse proxy, you can skip the rest of this section.

If the server runs behind a reverse proxy, a different context provider must be configured to reflect the public view of the service.

Find this section:

	<!-- Context Provider -->

	<!-- context provider when behind reverse proxy -->
	<!-- see https://docs.spring.io/autorepo/docs/spring-security-saml/1.0.x/reference/html/configuration-advanced.html -->
	<!--  
	<bean id="contextProvider" class="org.springframework.security.saml.context.SAMLContextProviderLB">
		<property name="scheme" value="https"/>
		<property name="serverName" value="www.myserver.com"/>
		<property name="serverPort" value="443"/>
		<property name="includeServerPortInRequestURL" value="false"/>
		<property name="contextPath" value="/spring-security-saml2-sample"/>
	</bean>
	-->

	<!-- context provider when not behind reverse proxy -->
	<bean id="contextProvider" class="org.springframework.security.saml.context.SAMLContextProviderImpl" />

Edit this by deleting the original contextProvider, uncommenting the reverse proxy version, and changing the serverName, serverPort and contextPath to match the public view.

It should look something like this (comments omitted):

	<bean id="contextProvider" class="org.springframework.security.saml.context.SAMLContextProviderLB">
		<property name="scheme" value="https"/>
		<property name="serverName" value="myserver.com"/>
		<property name="serverPort" value="443"/>
		<property name="includeServerPortInRequestURL" value="false"/>
		<property name="contextPath" value="/phixflow"/>
	</bean>

Configure the Metadata Generator

The core of the interaction between a SAML identity provider (e.g. Active Directory Federation Services) and a SAML Service Provider (e.g. PhixFlow) relies on the exchange of metadata. Each party generates metadata which describes how to connect to it, and that metadata must be installed into the other party before any connection can be made.

The metadata generator generates the PhixFlow server's metadata based on configuration parameters.

Find the metadata generator section:

	<!-- filter that generates metadata based on configured properties -->
	<bean id="metadataGeneratorFilter" class="org.springframework.security.saml.metadata.MetadataGeneratorFilter">
		<constructor-arg>
			<bean class="org.springframework.security.saml.metadata.MetadataGenerator"> 
				<property name="entityId" value="urn:test:phixflow:phixflow" />
				<property name="entityBaseURL" value="http(s)://myhostname:myport/phixflow" />
				<property name="extendedMetadata">
					<bean class="org.springframework.security.saml.metadata.ExtendedMetadata">
						<property name="idpDiscoveryEnabled" value="false" />
					</bean>
				</property>
			</bean>
		</constructor-arg> 
	</bean>

Then

  • change the entityId value to something that globally identifies the PhixFlow instance
  • change the entityBaseURL value to the URL normally used to start PhixFlow. If PhixFlow is running behind a reverse proxy, this should be the public URL, not the internal URL which only the proxy sees.

Configure the Identity-Provider Metadata Provider

The identity provider metadata provider defines how we have installed the identity-provider's metadata and how we should handle it e.g. we can control whether to enable or disable additional security checks.

First, install the identity provider's metadata file in a convenient folder. We asume that it will be in the metadata directory, which is along side the phixflow-login.xml file.

Find this section of the file:

	<!-- file-base identity-provider (idp) metadata provider - this defines the metadata for a single identity provider -->
	<bean id="idpFileMetadataProvider" class="org.springframework.security.saml.metadata.ExtendedMetadataDelegate">
		<constructor-arg>
				<bean class="org.opensaml.saml2.metadata.provider.FilesystemMetadataProvider">
					<constructor-arg>
						<value type="java.io.File">classpath:metadata/idp-metadata.xml</value>
					</constructor-arg>
					<property name="parserPool" ref="parserPool" />
				</bean>
		</constructor-arg>
		<constructor-arg>
			<bean class="org.springframework.security.saml.metadata.ExtendedMetadata">
				<!-- add properties to extend the metadata -->
				<!-- see https://docs.spring.io/spring-security-saml/docs/current/reference/html/configuration-metadata.html for values -->
				<property name="local" value="false" />
			</bean>
		</constructor-arg>
		<property name="metadataTrustCheck" value="true" />
	</bean>

Change metadata/idp-metadata.xml to reflect the actual location of the identity provider's metadata file.

classpath: and file:

You can refer to a file as classpath:dir/file or as file:dir/file.

classpath:dir1/file2 refers to a file in directory dir1 under the webapp's classpath; this can mean $webapp/WEB-INF/classes/dir1, but could also mean $tomcat/lib/dir1.

file:/dir1 refers to the top-level directory /dir1; without the '/' it refers to dir1 under the current directory (which is normally the tomcat home directory).

<bean class="org.springframework.security.saml.metadata.ExtendedMetadataDelegate">
	<constructor-arg>
		<bean class="org.opensaml.saml2.metadata.provider.ResourceBackedMetadataProvider">
			<constructor-arg>
				<bean class="java.util.Timer" />
			</constructor-arg>
			<constructor-arg>
				<bean class="org.opensaml.util.resource.ClasspathResource">
					<constructor-arg value="/metadata/sp-metadata.xml" />
				</bean>
			</constructor-arg>
			<property name="parserPool" ref="parserPool" />
		</bean>
	</constructor-arg>
	<constructor-arg>
		<bean class="org.springframework.security.saml.metadata.ExtendedMetadata">
			<property name="local" value="true" />
			<property name="alias" value="urn:test:phixflow:phixflow" />
			<property name="signingKey" value="PhixflowSAML" />
			<property name="encryptionKey" value="PhixflowSAML" />
		</bean>
	</constructor-arg>
</bean>

The first configurable part of the service provider metadata is the file name. By default this is expecting a file named "sp-metadata.xml" under the metadata folder. If you wish to use another file name change it here :


		<constructor-arg value="/metadata/sp-metadata.xml" />

Next we have the Extended metadata configuration. For the simplest setup all that needs changing here is the alias needs to be updated to the entity ID that you specified earlier. If you are using the recommended Key name of "PhixflowSAML" then no further configuration is required. If you are not using this key name then you will have to replace the PhixflowSAML with your keyname under the "signingKey" and "encryptionKey" sections.

	<!-- The following sections must be uncommented to enable SAML Login -->
	<!--

	<security:http entry-point-ref="samlEntryPoint"
		pattern="/saml/**" use-expressions="false">
		<security:intercept-url pattern="/**" access="ROLE_USER" />
		<security:custom-filter	after="BASIC_AUTH_FILTER" ref="samlFilter" />
	</security:http>
	
	<import resource="phixflow-SAML.xml/>
	-->

After this there is only one remaining section which contains a line that needs to be included when you wish to generate your metadata, but commented out if you do not wish to generate your own metadata. This line is as follows :

<!--<security:custom-filter before="FIRST" ref="metadataGeneratorFilter"/>-->


so to generate your metadata the configuration should look like 

 	<!-- with the exception of the metageneratorfilter line the following must be uncommented to enable SAML login -->
	<security:http entry-point-ref="samlEntryPoint"
		pattern="/SAMLLogin" use-expressions="false">
		<security:intercept-url pattern="/**"
			access="ROLE_USER" />
		<security:custom-filter
			after="BASIC_AUTH_FILTER" ref="samlFilter" />
	<!--  uncomment the line below to generate your service provider metadata -->		
	<security:custom-filter before="FIRST" ref="metadataGeneratorFilter"/>
	</security:http>


and if you do not need to generate your metadata the configuration should look like 

 	<!-- with the exception of the metageneratorfilter line the following must be uncommented to enable SAML login -->
	<security:http entry-point-ref="samlEntryPoint"
		pattern="/SAMLLogin" use-expressions="false">
		<security:intercept-url pattern="/**"
			access="ROLE_USER" />
		<security:custom-filter
			after="BASIC_AUTH_FILTER" ref="samlFilter" />
	<!--  uncomment the line below to generate your service provider metadata -->		
	<!--<security:custom-filter before="FIRST" ref="metadataGeneratorFilter"/>-->
	</security:http>


Other configuration

After this in order to enable SAML all that is required is to uncomment the following sections with a few exceptions. First uncomment all of the text listed below:

		<!--

	<security:http entry-point-ref="samlEntryPoint"
		pattern="/saml/**" use-expressions="false">
		<security:intercept-url pattern="/**"
			access="ROLE_USER" />

		<security:custom-filter
			after="BASIC_AUTH_FILTER" ref="samlFilter" />

	</security:http>
	
		<import resource="phixflow-SAML.xml/>
	-->

Metadata Generation

After completing this initial setup. It's time to generate the metadata. To do this setup the login configuration form to have a log in with SAML button and click it. You should be redirected to your identity provider and rejected, but your metadata will be generated by this step. Next log in as a local user then go to <<yourhost>>/Phixflow/saml/metdata in order to download an XML file of your metadata.This will need to be given to your identity provider to log in. In order to simplify configuration it is recommended to save this as metadata/sp-metadata.xml

At this point please refer to  the Phixflow Active Directory Setup section for more information on how to connect your identity provider provided groups to PhixFlow groups. The "default domain" section is not needed.

Logging in as a SAML user


To log in, users simply have to select a login option with SAML and click on the login button where they will be redirected to the identity provider to enter their credentials. If the login form configuration has been set to automatically log in with SAML, then they will see this screen and will instead be redirected straight to the identity provider.

Troubleshooting

Enhanced diagnostics can be generated by adding the lines

#Log information about the SAML login framework
log4j.logger.org.springframework.security.saml=DEBUG
log4j.logger.org.opensaml=DEBUG
log4j.logger.PROTOCOL_MESSAGE=DEBUG

to your log4j.properties file - see Server Logging for details on controlling logging options with this file, and where to find the results.

Note that with all options applied, the log files generated will be very large. You must switch off these options as soon as you have completed your tests. You can comment out the lines in the log4j.properties file, if you want to keep them in the file, by placing a # at the beginning of each line.

You could also consider applying a more limited set of debugging options, e.g.

log4j.logger.org.springframework.security=debug
log4j.logger.com.accipia.centerview.util.security=debug
  • No labels