This page provides details of the properties for

the phase node. These are part of actionflows.

Overview

Image Modified

Actionflows process data one record at a time. However, sometimes you may want to process all records up to one point, before moving on to the next process. For example, you may first want to check all the data before starting to process the first record. One way to do this is to have separate actionflows, so that all the data is processed by one actionflow, saved to a table and then the table is used at the start of the next actionflow. The other way is to use a 

.

Phase nodes act as an internal break in the actionflow. For example, you can have one phase in which records are read into the actionflow and checked one at a time. Once all records have been validated, the actionflow can then move to the next phase, where records are updated. Phase nodes are particularly useful if there the actionflow requires the user to make a choice as part of the actionflow. 

Example

They can be used in combination with

Insert excerpt
_action_screen _action_screen nopanel true

 nodes which contain Start Phase buttons. These buttons link directly to the outputs on the Open Screen node and can be connected to different phases. For example If the user chooses option 1, phase 1 can run. If the user chooses option 2, phase 2 can run instead. Especially useful if there is a requirement for user confirmation before processing.

Insert excerpt
_property_tabs _property_tabs name basic-h nopanel true

Basic Settings

Insert excerpt
_property_tabs _property_tabs name access-h nopanel true