What is a Bulk Delete Action?

The 

Insert excerpt
_action_bulkdelete _action_bulkdelete nopanel true

 action deletes records in bulk from a table, such as deleting all records, or those records which satisfy the specified filter criteria set on the node. 

Note: Bulk Delete actions will only delete records in tables with the Period of Transactional.

Insert excerpt
1.09 Save Action Configuration 1.09 Save Action Configuration name TablePeriod nopanel true

Insert excerpt
_action_delete _action_delete nopanel true

 vs 

Insert excerpt
_action_bulk_delete _action_bulk_delete nopanel true

 

The key difference between 

Insert excerpt
_action_delete _action_delete nopanel true

 and 

Insert excerpt
_action_bulk_delete _action_bulk_delete nopanel true

 is that the Bulk Delete action purges records from PhixFlow, including the audit history of records where Audit Manual Changes has been enabled.

To delete records and persist the audit history of the record, see Delete Node.  

Creating Bulk Delete Actions

1. Click the 

   Insert excerpt
   _action_bulkdelete _action_bulkdelete nopanel true

    icon in the Actionflow toolbar to display any existing tables in the applicationapplication 
   1. Existing tables can be dragged from the Repository onto the canvas, then choose 

      Insert excerpt
      _action_bulkdelete _action_bulkdelete nopanel true

       to create a Bulk Delete node
2. Alternatively, drag the 

   Insert excerpt
   _action_bulkdelete _action_bulkdelete nopanel true

    icon from the toolbar onto the canvas
3. In the Create Bulk Delete Action window:
   1. Enter a Name
   2. Choose a Type from: 
      1. Delete: allows only records satisfying the specified filter criteria to be deleted
         1. Set the filter criteria in the Bulk Delete Action 

            Insert excerpt
            _property_settings _property_settings nopanel true

             under Data Retrieval Options - see section below
      2. Delete All: deletes all data from the selected table 
   3. Choose to Allow Audited Table to display tables with Audit Manual Changes enabled in the Table drop down
      1. By default, tables with Audit Manual Changes enabled are not shown in the Table drop down list
   4. Choose the Table from the drop down where the records will be deleted
      1. Or click the table icon to display tables in the Repository
   5. Select Create Action

When creating delete actions it can be useful to set up confirmation messages that allow users to confirm or cancel the deletion. See 1.13 Confirmation Message Configuration.

Setting Delete Action Filter Criteria

Where the Type is set to Delete on the

Insert excerpt
_action_bulkdelete _action_bulkdelete nopanel true

 action, the Data Retrieval Options section shows in the 

Insert excerpt
_property_settings _property_settings nopanel true

. This filter must be set for the Bulk Delete action to run.

1. Choose a Data Range from:
   1. Latest: selects data from the latest recordsets
   2. All: selects data from all recordsets (default)
2. Set the Filter Criteria to specify which records will be selected for deletion. See Filter → Filter Details
   1. Incoming attributes mapped to the Bulk Delete node can be referenced in the Data Retrieval Options using the syntax, ConnectorName.AttributeName, e.g. in.MyAttribute

Excerpt
name BatchSize
Specify Delete Batch Size Where the Type is set to Delete on the Insert excerpt _action_bulkdelete _action_bulkdelete nopanel true  action, in the Advanced section, an optional Delete Batch Size can be set to determine the size of the batches. If left blank the batch size set in System Configuration → System Tuning → Delete Batch Size, is used as the default. The System Configuration value can be overridden with this batch size.

Bulk Delete Output Attribute (modifiedRows)

The output attribute, modifiedRows, automatically shows when mapping from a Bulk Delete action. This attribute is a count of the rows that are updated by the action, but if the Type (see above) is set to Delete All then the value is unavailable.

Image Added

HTML Comment
hidden true
Insert excerpt Bulk Delete Node Bulk Delete Node nopanel true

Worked Example

Here's a worked example using the Company Data (available from the Learning Centre).

In this example, we are using:  

• A Company Rejected Companies screen containing three grids of the Companies, Orders and OrderLines data - this screen was created using the Multi-Tile template

Tip
If you are completing this chapter as part of the Actionflow course and using a training instance, the data and screens have already been pre-loaded into the Actionflow Advanced Application. For this example, we'll be working on the Company Rejected Companies screen.

Bulk Delete Rejected Companies

In this example, we'll set up an Actionflow to delete all companies with a Status of Rejected, along with any associated Orders and Order Lines.

View Setup

1. Open the Company Rejected Companies screen
2. Create an Actionflow on the Delete All button
   1. Name: BulkDeleteRejectedCompanies
3. Configure the input connection point to

   Insert excerpt
   _actionflow_on_click _actionflow_on_click nopanel true

4. Create a

   Insert excerpt
   _action_view _action_view nopanel true

    to the Companies data to output the CompanyID of rejected companies only
5. Connect the input to the View 

   1. 
      

      Expand
      title Checkpoint

      
      

Lookup Setup

Create a lookup to the Orders data to retrieve the orderIDs as an array. The orderID can then be used to bulk delete the orders and orderLines. Use a A lookup is used to pass a large block of data (an array) rather than one record at a time.

 to the Calculate action

From the Calculate action, create a lookup the Orders data

1. Incoming Mappings: CompanyID
2. Outgoing Mappings: Order_ID

Create a filter on the Orders 

Expand
title How?
Create a  Insert excerpt _action_calculate _action_calculate nopanel true  to process the lookup Orders dataMap CompanyID from the Companies
Insert excerpt
_action_view	_action_view
nopanel	true

Insert excerpt
_action_view _action_view nopanel true

 to only retrieve orders that match the incoming CompanyID

On the Calculate action, create an Output Attribute to process the Order IDs coming from the lookup as structured data

Expand
title Checkpoint

Bulk Delete Action Setup

1. Create three Bulk Delete Actions

   Insert excerpt
   _action_bulk_delete _action_bulk_delete nopanel true

    actions for deleting from the three tables: Companies, Orders and OrderLines
2. Map the associated ID attribute into the relevant Bulk Delete node

   1. 
      

      Expand
      title How?
      Map the following attributes from the Calculate action to the Bulk Delete action specified below: Delete Companies: CompanyID (from the View) Delete Orders: OrderID (from the Calculate) Delete Order Lines: OrderID (from the Calculate)

      
      

3. Set up filters on each node in the Data Retrieval Options section to ensure only records associated with a rejected company are deleted

Expand
title How? & Checkpoint

Testing

1. Return to the Company Rejected Companies screen and lock the screen
2. Press the Bulk Delete button
3. Refresh the data in each grid to see the results
4. Review the Orders and Order Lines data to check there are no orders or order lines with a blank company 

Excerpt
name ReinstatingData
Expand title How to Reinstate Data Reinstating Data After testing, you may wish to remove the changes you've made and reinstate your data to use again. Ensure you have downloaded the data from the Learning Centre. Open the Advanced Actionflow Data Analysis Model Right-click on a Insert excerpt _tables _tables nopanel true  where the data has been changed and select  Insert excerpt _rollback _rollback nopanel true Select to Rollback all data Toggle off Keep Old Recordsets Click Confirm To reupload the data in its original form, hover over the table's   Insert excerpt _file_collector _file_collector nopanel true  and choose  Insert excerpt _upload_file _upload_file nopanel true Select the downloaded file on your PC Click Upload File Hover over the connected table and choose  Insert excerpt _run_analysis _run_analysis nopanel true Repeat these steps with all tables where the data has been changed and requires reinstating Once the data is restored for each table,  Insert excerpt _save_saveModel _save_saveModel nopanel true  the Analysis Model

3.04 Bulk Update Action ConfigurationImage Added